GTS - The specialist for maintenance free bearings
  Deutsche Version
Firma Kontakt
Produkte Introduction
Table of Dimensions
Sliding Application
Material Selection
Benefits
Bearing Load
Friction Speed
Temperature

Coefficient of Friction
Tolerances
Design Consideration
Material Specification
Lumet
Bearing Dimensions
Because of the plug configuration required, the wear plates, thrust plates, bushing and flanged bushings require a minimum wall thickness. Dimensional values lower then the following shoud be avoided:
Inside diameter: 3" or less 3" to 4" Over 4"
Wall thickness: = 0.25" = 0.375" = 0.50"

The hearing length should be 0.8 to 1.5 times the inside diameter.