GTS - Ihr Spezialist für Gleitlager
  Deutsche Version
Firma Kontakt
Produkte Getro F 090

Introduction
Table of Dimensions
Fields of Application
Technical Data
Chemical Data
Installation Instructions
Installation
Tolerances

Oil and Grease Reservoirs
Getro Übersicht
Alignment
Accurate alignment is essential for all radial and axial bearings. This is particularly crucial for dry bearings which do not include a lubricant film to assist in dissipating the loads. With Getro bearings, the maximum permissible misalignment across the entire width of the bush is 0.02 mm. This also applies to bushes fitted as pairs and to stop collars. Where bushes are arranged one behind the other, we recommend using bushes with identical widths. In such cases, ensure that the butt joints are aligned. Excessive loads on the edges must be prevented by appropriate design and construction methods: chamfers, larger bore diameters around the rim or bushes which extend beyond the rim of the bore hole are some methods that can be employed to minimise such peak loads.